First-virtual-communications Voyager 3000 Manuel d'utilisateur télécharger pdf (Page 31)

Installation and Setup

2-11

Access to the controller is obtained by removing the four screws at the side of the top panel.

This will allow access to the main board. Removing the piggy-backed channel cards reveals

the topography of the main board as shown in Figure 2-12.

SIMM Installation

Note the following guidelines with regards to DRAM:

• Minimum DRAM required is 4 MBytes installed in SIMM socket

• EDO RAM is recommended for enhanced performance.

Figure 2-11 RAID Controller

Figure 2-12 Main board access

Power

Socket

Channel 0

CPU

Simm

Module

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 73 74

Pas de commentaire

First-virtual-communications Voyager 3000 Manuel d'utilisateur Page 31