First-virtual-communications PS1010-3A Manuel d'utilisateur télécharger pdf (Page 8)

IBBI Electronics

• Switch ON the PS1010-3A [(1)]

• [(3)] will show “F” to indicate Firmware version

• Display [(2)] will show the Firmware version in

the following order.

Note: PS1010-3A is not firmware upgradeable by

the customer.

6 Troubleshooting

No display

• Check power cable/Input power

• Check power switch [(1)]

• Check fuse at the back of the PS1010

Even if the voltage adjust knob is turned the value

does not vary.

• Check whether the Volt LED indicator [(4)] is

ON. If not then you are not in the right set up

and follow up on how to setting the output

voltage guide lines

• Check whether the CC LED indicator [(4)] is

ON. If so then the current limiting occurs due to

insufficient current limit adjustment or due to

excessive current draw.

6. 0. 1 F

Major version

Minor version

Build

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

First-virtual-communications PS1010-3A Manuel d'utilisateur Page 8